Sale
Ampere Audio AA-4.0 15" - 3800w RMS Subwoofer $859.99
Ampere Audio AA-7500.1 - 7500w Monoblock Amplifier $1,699.00 $1,698.49

In stock (can be backordered)

Sku:AA12001D

$349.00 $348.49

In stock (can be backordered)

Brand:

The Ampere Audio AA-1200.1 1200w monoblock amplifier is the perfect amplifier for a daily driver. With 1200w of power at your finger tips, it makes it a perfect amp for any daily setup. So if you’re looking to add some bass to your ride or just upgrade to a more efficient, powerful amp, the AA-1200.1 is the amp for you!

Ampere Audio AA-1200.1D

  • Double Sided Through Hole Epoxy PCB
  • Daisy-Chain Through Output RCA (Strappable)
  • Efficiency: 86% @ 4 ohm, at 100Hz
  • 24dB/Oct Variable Crossover
  • Multi-Way Protection Circuitry
  • (Thermal/Over Current/Speaker Short/Speaker DC Protection)
  • Variable Subsonic
  • Variable Bass Boost
  • Variable Low Pass Filter
  • Variable Phase Shift
  • 4 Gauge Power Supply Connectors
  • Tested Voltage & THD: 14.4V & Less than 1% THD
  • Operating Voltage: DC 10V~18V
  • Digital Class-D Linkable Mono Block Amplifier
  • 1 Ohm Stability
  • RCA Line Input and Master Output
  • 24dB Octave Crossover Slope
  • Wired Remote Controller

Technical Specs

  • Number of Channels: 1
  • Power 14.4 VDC – 1 ohm: 1,200W RMS
  • Power 14.4 VDC – 2 ohm: 600W RMS
  • Power 14.4 VDC – 4 ohm: 300W RMS
  • Strapped Power 14.4 VDC – 2 ohm: 2,400W RMS
  • Input Sensitivity: 6V ~ 0.2V
  • Signal to Noise Ratio: 90dB
  • Frequency Response: 10Hz ~ 350Hz
  • Crossover: 24dB / Octave
  • Subsonic Filter: 10Hz ~ 60Hz
  • LPF (Low Pass Filter): 35Hz ~ 300Hz
  • Bass Boost @ 45Hz: 0 ~ 12dB
  • Phase Shift Control: 0 ~ 180 degree
  • Working Voltage: 8.5V ~ 16V
  • Efficiency: 86%
  • Recommended Fusing: 30A x 3
  • Dimensions: 256(W) x 55(H) x 294(L) mm

Recommended Power

For the Ampere Audio AA-1200.1, we recommend a minimum of an upgraded front battery. All of which is connected by 4ga OFC wiring.

Xplicit Audio is proud to be an Authorized Ampere Audio Dealer!

Weight10 lbs
Dimensions17 × 11 × 3 in
Brand

Amplifier Type

RMS Rating

Warranty

In the event that an Ampere Audio Amplifier/Subwoofer fails due to a manufacturing defect, we will fix or replace it free of charge for a time period of one year from the date of purchase. This only applies to the original purchaser with original box and accessories must accompany. Warranties are non-transferable and amplifiers will not be covered under warranty if ran below a 1 ohm load or if underpowered by a weak electrical system. Failure to do so can decrease the life of the amplifier and void your warranty.

This warranty does not apply with respect to the following:

  1. Ampere Audio’s warranty does not cover burned/open voice coils or lead wires, ripped surrounds or folded cones.
  2. Defects or damage caused by environmental accidents.
  3. Products that have the serial numbers removed or altered.
  4. Products which have been altered or repaired by anyone other than Ampere Audio or dB-r.

All returns must be sent with a RA # on the outside of the box in four place. Products sent without a RA will be refused and shipped back at the customers expense. The RA # can be obtained by contacting Ampere Audio and requesting the needed information.

Warranty claims must be accompanied by the original invoice to validate the warranty service or contact Ampere Audio for information.

Amplifier Repair: dB-r electronics

Customer reviews

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Be the first to review “Ampere Audio AA-1200.1D – 1200w Monoblock Amplifier”

Use one of the allowed file type: jpg,png.

    Back to Top