SoundQubed HDS2 15 – 600w RMS 15″ Subwoofer

SoundQubed HDS2 15 - 600w RMS 15" Subwoofer

SoundQubed HDS2 15 – 600w RMS 15″ Subwoofer

$179.95

In stock

$179.95

-

Brand:
Buy 4 - 7 8+
Price $170.95 $161.96
If you purchase this product you will earn 179 Points
If you purchase this product you will earn 179 Points
Clear

Description

The SoundQubed HDS2 15″ 600W Subwoofer improves on its predecessor in terms of build, sound quality, heat dispersion, and frequency response. The 8, 10, 12, or 15-inch models are available with dual 2 or 4-ohm voice coil. The HDS2 series is an affordable option for your daily-driver car audio system build. First, choose a sealed, ported, or band-pass enclosure. Once you decide on an enclosure option, pair your sub(s) with the appropriate S Series monoblock amp. From there, enjoy easy wiring thanks to 10 AWG push terminals (14 AWG direct leads in the 6.5 and 8-inch models). Soon you’ll be on your way to a dramatically enhanced listening experience.

  • Power Handling 600W RMS, 1200W Peak (Burp Only)
  • Available in Dual 2- and Dual 4-Ohm configuration.
  • 2.5″ diameter four-layer copper coil.
  • Cast frames instead of stamped frames.
  • Increased temperature handling, from 300° to 360°
  • Vented back-plate for optimal cooling and less turbulence in the coil gap.
  • Stronger motors with bigger magnets and top plates.
  • Longer winding length for greater power handling.
  • Wider and taller surround for increased excursion.
  • Conical back plate to allow more voice coil travel.
  • 10-gauge direct leads.
  • Black electroplated top and bottom plates.
  • Non-pressed, fiber-added cone for maximum rigidity

SoundQubed HDS2 15 – 600w RMS 15″ Subwoofer Specifications:

Model HDS206 HDS2.208 HDS2.210 HDS2.212 HDS2.215
RMS Power 350 W 600 W 600 W 600 W 600 W
Peak Power 1000 W 1200 W 1200 W 1200 W 1200 W
Magnet Weight 60 Oz 100 Oz 100 Oz 100 Oz 100 Oz
Coil Diameter 2″ 2.5″ 2.5″ 2.5″ 2.5″
Coil Length 28 mm 36 mm 40 mm 40 mm 40 mm
Woofer Size 6.5″ 8″ 10″ 12″ 15″
F(s) 45.39 Hz 44.41 Hz 33.65 30.95 26.92
Impedance D2 / D4 D2 / D4 D2 / D4 D2 / D4 D2 / D4
Z(max) 33.81 38.77 Ω 65.65 59.14 Ω 56.79
Q(ms) 3.553 4.465 5.461 5.078 6.363
Q(es) 0.5515 0.5791 0.3991 0.423 0.608
Q(ts) 0.4774 0.5126 0.3719 0.3905 0.5551
V(as) 3.264 L 5.319 L 17.43 L 45.57 L 100 L
L(e) 1.498 mH 5.394 mH 5.745 6.079 mH 6.473
n(0) 0.05% 0.07673 % 0.1586 0.3046 % 0.3058
M(ms) 93.7 143.8 grams 201.7 209.2 grams 333.1
C(ms) 0.131 0.089 mm/N 0.111 0.126 mm/N 0.105
Sensitivity 1W/1m 79.32 80.95 84.1 86.94 86.95
BL 14.84 17.56 21.86 20.91 21.42
Xmax 9 13 14 14 14
Sd 5.25″ 6.37″ 8.125″ 10″ 12.75″
Displacement .04ft³ .06^ft³ .06^ft³ .07^ft³ .11^ft³
Mounting Depth 4.125″ 5.5″ 6.75″ 6.75″ 7.44″
Circle Cutout 6.0625 7.5″ 9.31″ 11.25″ 13.875″
Sealed Enclosure (Cu Ft): .25-.5 FT³ .35-.75 Ft³ .5-1.0 FT³ .75-1.5 FT³ 1.75-2.75 FT³
Ported Enclosure (Cu Ft): .25-75 Ft³ .75-1.25 FT³ .75-1.25 FT³ 1-1.75 FT³ 3-6 FT³

The oversized double magnet in the HDS2 is provides consistently high output levels at 600 Watts RMS. The vented, electroplated back plate lets heat flow away from the coil. As a result, you’ll be less likely to burn your subwoofer’s voice coils.

The HDS2 series uses a 2.5-inch diameter, four-layer, copper dual voice coil with a conical back plate for longer travel. High-temperature adhesives and high quality coil wire guarantee reliable long-term performance and a healthy level of bass!

The HDS2 series feature cast aluminum frames. This upgrade provides better heat sinking and increased excursion over stamped-steel baskets. A softer three-piece spider system achieves enhanced performance and lower tuning.

An Extended Range of Motion (EROM) surround profile keeps your cone diameter as large as possible while allowing for long, controlled excursion. The EROM profile gives you more cone area, greater stiffness, and lower mass for more accurate coil signal response. The HDS2 has a non-pressed, fiber added cone for maximum rigidity and long life.

We are proud to be an authorized SoundQubed dealer!

Additional information

Weight 29 lbs
Dimensions 18 × 18 × 11 in
Brand

Subwoofer Impedance

,

Subwoofer RMS Rating

Subwoofer Size

Voice Coil Diameter

2.5"

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “SoundQubed HDS2 15 – 600w RMS 15″ Subwoofer”